Eusso UGL2430-UHM Instrukcja Użytkownika Pobierz pdf (Strona 8)

Back Panel Connectors

Button/Port Description

Reset Reset configurations to default. You would use the reset button only

when a program error has caused your 11n AP router to hang. Press

the button and hold for 10 seconds.

WPS Click WPS button about 2-3 seconds while you are connecting a

PC of wireless adapter with WPS function (you must enable WPS’

PBC function).

LAN

(1x, 2x, 3x, 4x)

Ethernet RJ-45 connector, connect to PC with a RJ-45 Ethernet

cable.

WAN Ethernet RJ-45 connector, connect to WAN access device, such as

the Cable modem or ADSL modem.

DC-12V Power connector, connect to the power adapter (DC-12V)

packaged with the AP router.

1.5 Installation Instruction

1) Power off 802.11n AP Router and DSL/Cable modem.

2) Connect computer to the LAN port on the Wireless Router with

Ethernet cable.

3) Connect the DSL or Cable modem to the WAN port on the Wireless

Router with Ethernet cable.

4) Power on DSL or Cable modem first, then connect power adapter to

the power jack on the rear panel of Wireless Router and plug the

power cable into an outlet.

5) Check LEDs.

a) Once power on Wireless Router, Power LED should be on.

b) LAN LED should be on for each active LAN connection.

c) The WAN LED should be on when the DSL or cable modem is

connected.

Warning: Only use the power adapter is provided from this package, use other

power

adapter may cause hardware damage

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 55 56

Brak uwag

Eusso UGL2430-UHM Instrukcja Użytkownika Strona 8