Eusso 2 & 4 Port VoIP Gateway Instrukcja Użytkownika Strona 1

VoIP SIP IP PBX IP PBX with 4-FXO and SIP Proxy Server UTG7204-ON User Manual Copyright EUSSO Technologies, Inc. All rights reserved.

4). UTG7204-ON provides 50 SIP user ID number accounts which can be configured by Web browser. The preset user ID numbers are from 2001~2010 with

Setup Wizard Setup Wizard provides two fast setup modes, Router & Non-Router Modes, for sequential configurations; (1) IP-PBX used as a Router

8.1 Network UTG7204-ON IP-PBX provides two RJ45 connectors for LAN and WAN ports at 10/100M Ethernet interfaces. The Network will display the curren

8.1.2 LAN Settings LAN Port can be used for IP-PBX to connect to a Notebook PC for configurations. The embedded DHCP Server will automatically assign

Static IP mode Dynamic IP Mode PPPoE Mode When UTG7204-ON IP-PBX connects to ADSL Modem with PPPOE link, you need to enter the account name

IP address for the First and Second DNS servers. 8.1.4 DHCP Server The embedded DHCP server in NAT will automatically assign IP address to the netwo

Service Provider: Choose DDNS server that updates your IP address. Host Name: Set your host name for DDNS update. User Name: The user name regist

Example for www.dyndns.com DDNS Settings It shows the current registration of www.3322.org or www.dyndns.org for dynamic DNS service. 8.1.6 VPN

VPN Server Configuration for PPTP (Point-to-Point Tunnel Protocol) VPN Server: You may enable or disable VPN Server Service. UserName: For

8.2 System The UTG7204-ON IP PBX System configurations can be set in this section. The settings include Server Ports Setting, Rate Setting, DMZ, Tr

2 Table of Content 1. INTRODUCTION ...

8.2.2 Rate Setting Rate setting is used to calculate the charges for each call. The IP PBX will generate a call record for the charges. All th

Please follows the steps to configure the DMZ: (1) Click on DMZ (2) Set the DMZ IP or domain name URL (3) Enter the Network IP and Subnet Mask Exa

(1) Need to work with FXO ports, (2) Need to connect with UTG7204-ON, (3) Need to connect with another SIP Server. In summary, the TrustHost address

8.2.6 Hot Lines Hot line function numbers can be entered into the list. Make sure each of the Hot line function number is unique, and not the same a

Detailed Descriptions for Hotline Function Numbers Hotline Numbers Functions Descriptions *8 Call pickup Press *8# to pickup calls within the same

251602 Extension functions Forward , Find me , Binding, and Password can be set up for each extension number. Example: To set extension 202 busy fo

Hotline Applications Example: A customer calls into Operator and wants to talk to the IP extensions 203, but the 203 user are not near the phone. Pr

Submit to add the number 208 for Queue1. The number will be displayed in the Current Queue Agent List for Queue 1. Submit to add the number

It will display voice prompts in the List. Press the ICON to Activate the Voice. The No. 1 of Status will show “1” to indicate activate status

When you need to store the voice mails, please do the steps as follows; (1) Insert USB disk (2) Select “Insert USB Disk” in the current status (3)

38.4.3 Fallback Settings...

General settings : MailBox: The e-mail address of mailbox. User: The user name used by the e-mail address. Password: The password used by the

8.2.10 Time-Zone Setting System date and time can be set in this section. The time will be recorded for use of CDR, or the CDR may record wrong timi

8.3.2 Calls from VoIP The IP PBX can function as a terminal CPE to register into a SIP server or another IP PBX. For any external VoIP calls,

z Registry Address : The SIP Registration Server IP/URL:Port number provided from ITSP, other IP PBX, or SIP Server. z User Name : The user nam

The list will display registered users with status after submit. You may also press the icon to modify the setting. 34

You may press the icon to delete this setting. 8.3.3 Access Number Access Number is used to supplement the function of incoming calls from VoIP S

Access Number : The registered number to ITSP or SIP server. Redirect into : One of the hotline functional calls. Memo : For memo descriptions.

8.4 Outgoing Call The IP PBX provides two kinds of outgoing calls; one is via FXO port to local PSTN lines, and the other is via VoIP calls. The

Example: When one user press 056789 to apply the outgoing rule, the IP PBX will use one of the FXO port in the group 0, delete 0 (one digit), t

8.4.2 Outgoing Calls via VoIP The UTG7204-ON IP PBX can make a VoIP call to the user of another remote UTG7204-ON. The user of the remote IP PB

1. Introduction 1.1. Overview The UTG7204-ON is an embedded Voice over IP (VoIP) PBX Server with Session Initiation Protocol (SIP) to provide IP ex

8.4.3 Fallback Settings The fallback can be used to call out via different routing when the previous call fails. This reduces the calling failure

Example: You may also use the dial plan for fallback new number. If you want to dial 9123456 with fallback new number 0123456, then you may enter 0${

8.5 SwitchBoard (Auto Attendant Settings) The IP PBX SwitchBoard provides an Auto Attendant to service user for calls. When receiving an incoming c

8.5.3 Auto Attendant Auto Attendant will handle all the incoming calls when no one can answer in the company. There are two ways for attendant.

z Number : If you select the Number way . The extension number will answer the call. z Time/Week/Date/Month: The time of these time field set (Time

8.6.1 Add Single User – Single User Account Opening You may add single user account in this section by entering user name, password, groups, and cal

8.6.3 Bindings Extension binding is used to bind many extension numbers together as a group. When calling to one of the extension, the other bi

8.6.4 Delete User Account There are two ways for user account deletion; one is for single account deletion, and the other is for group account dele

z Inquiry : Choose one User-ID or User Name for search . z Condition (Fuzzy Query) : Enter the number or user name for search. This page wil

z Inquiry : Choose one User-ID or User Name for search . z Condition(Fuzzy Query) : Enter the number or user name for search. This page shows

5 2. Features The UTG7204-ON IP PBX equipped with RJ45 & RJ11 connectors is featuring as the following: ¾ SIP Server supports 50 user registrat

answer for the incoming call. If no answer again, the call will be transferred to the next extension number until the call is answered. The max

The list will show the current setting status for each user as follows; (1) Normal (2) Unconditional Transfer (3) Call Transfer; including busy, off-

Firstly, you need to set up auto configuration for the IP Phone. The following is a reference example for IP Phone setting. z Auto Configuratio

z Phone's Mac Address : The Mac address of the IP Phone. 8.7.2 Queue Setting Call waiting is to queue all the incoming calls and to assign

The IP PBX provides 4 call waiting queues. The waiting queues can be set to a simple calling center, and the user may define individual waiting q

8.7.3 Conference Rooms The IP PBX provides two standard voice conference rooms. The details are as follow; (1) Conference Room Password When a

56(2) The extension is in monitoring status. (3) Kick out the extension number. The extension will be forced out in 5 minutes.) (4) IVR Control of C

The conference room password is used to enter the conference room. The maximum capacity is for the maximum number of users in the room. 8.7.

DSCP field is a superset of TOS, its definition is backward-compatible with TOS, and its value can be from 0 to 63, with 0 for minimum priority, 63

FXO Volume: Voice transmit gain and receive gain of the FXO port. Silence Threshold: Signal under this threshold will be regarded as silence. To

4. Packing Content Inside the package you should find: (1) One UTG7204-ON IP PBX (2) One AC100~240V to 12VDC/1A Power Adaptor (3) One Cat 5 Ethernet

8.8 Call Detail Records Query The IP PBX keeps call records for 2 months. You may have two ways for record queries. One is to query for the wh

By Time 8.8.2 User Call Records You may query all the calls for certain user during the specified time frame and export to local storages. Exam

8.9 Upgrade & Reboot 8.9.1 Export & Import Before upgrading the UTG7204-ON IP-PBX or reset to factory defaults, you may export all the use

8.9.2 System Upgrade The UTG7204-ON supports two different ways for system upgrade; Web GUI Upgrade and SIP Server Upgrade. Before upgrading, please

9. Applications Applications of IP PBX under Firewall with DMZ This will protect corporate network security while allowing UTG7204-ON to work

65Applications of IP PBX with ADSL This UTG7204-ON supports PPPOE to work with ADSL and to integrate IP-PBX into the corporate network for VoIP appl

Interface Connectors 1. DC Power 12Volt DC / 1A Power Adaptor with 100~240V AC power input 2. FXO ports 4 FXO ports are for connection to P

6. Installations Internet ADSL modemIP Phones FXS FXO LAN Life Line POTS WA NPSTN Ethernet Switch Hub7. Reset to Factory Default

8. IP PBX Configurations by Web Browser You may enter the IP address from PC Web browser to configure UTG7204-ON. For example, enter http://192.168